API
< Back to all clusters
[INTERNATIONAL] · South Korea · 3 sources

started · updated

Ulsan Thermal Power Plant collapse investigation blames excessive cutting

An investigation into the November 2024 boiler tower collapse at the Ulsan Thermal Power Plant has identified excessive structural cutting and flawed engineering reviews as the primary causes of the disaster. The incident, which resulted in seven deaths and two injuries, occurred during a pre-weakening process intended to prepare the structure for controlled demolition.

The investigation committee, organized by the Ministry of Land, Infrastructure and Transport, found that columns were cut beyond their load-bearing capacity, leading to local buckling and a chain reaction collapse. Key technical errors included overestimating the strength of the columns and underestimating the total weight of the structure. Specifically, engineers applied a 24mm steel thickness measurement from the ground level to the entire tower, despite the actual thickness at the collapse point being only 15mm. Additionally, the structure's weight was calculated at 3,005.8 tons, significantly lower than the actual 3,525.8 tons.

The report also highlighted management failures by the main contractor, HJ Shipbuilding & Construction, which relied too heavily on subcontractors without verifying site conditions, and the client, Korea East-West Power, which failed to provide systematic oversight. The Ministry plans to use these findings to reform demolition safety regulations and will cooperate with authorities for legal and administrative actions.

Entities

HJ Shipbuilding & Construction · Korea East-West Power · Ministry of Land, Infrastructure and Transport · Ulsan Thermal Power Plant